How to Clean a Glass Reactor Properly – Ensuring Lab Efficiency and Equipment Longevity

To ensure the accuracy of chemical reactions and prolong the service life of your equipment, regular cleaning of glass reactors is essential. Especially after handling solvents, acids, or high-viscosity substances, proper cleaning helps prevent cross-contamination, build-up, and performance degradation.

Cleaning Procedure:

1. Drain Residual Liquids: Make sure the power is off. Discharge any remaining solution from the reactor.

2. Warm Water Rinse: Rinse the inner wall with warm water to loosen any residue.

3. Use Mild Detergents: Choose a neutral or weak alkaline glassware cleaner based on the substances used. Avoid strong corrosive agents.

4. Brush & Rinse Thoroughly: Gently brush the interior and rinse with deionized or purified water at least three times.

5. Dry Completely: Use filtered air or nitrogen to dry the reactor chamber to prevent water spots or contamination.

For sticky or colored organic compounds, consider using ethanol or acetone combined with ultrasonic cleaning for optimal results.

Hefei Yangmai specializes in high-quality glass reactors and provides complete support for maintenance and operation. Feel free to contact us for further technical assistance.